I have a ADV7612 / ADV7511 Eval board and I want to demonstrate the ADV7511 Linux drivers on it. Can you please provide me with the relevant details?
So far we have not worked with the EVAL-ADV7612-7511 board. The adv7511 DRM driver that you are referencing was written to be used with the ADV7511 connected to a host system, like a SoC. So it will not be that easy to adopt it to be used for the eval board. But there is also a driver for the ADV7511 developed by Cisco. This is a V4L2 driver and can be found here: http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/tree/drivers/media/i2c/adv7511.c
There is also a driver for the ADV7604 and ADV7611 found here: https://github.com/analogdevicesinc/linux/blob/xcomm_zynq/drivers/media/i2c/adv7604.c
It should hopefully be fairly simple to add support for the ADV7612 since that is basically a ADV7611 with two inputs.
The next step is then to write a so called V4L2 bridge driver. The bridge driver describes how the ADV7611 is connected to ADV7511. Once you have done that you should be able to control both the ADV7611 and ADV7511 from Linux userspace and configure things like resolution or input port.
Retrieving data ...