How is recommend to connect Unused pins TX1B_P, TX1B_N:
To 1.3V B or A
Through 330nH inductors
Unused Tx output pins need to be teminated by connecting them to 1.3V supply voltage.
It is a direct connection and use of capacitors or inductors is not required.
Thanks for your support.
What I need to do with AUXDAC1 & AUXDAC2 if they unused.
You can disable them in the register map (Reg 0x023) and leave the outputs floating.
Thanks again for your support.
What I need to do with the following pins if they unused:
CTRL_IN0 to CTRL_IN3
CTRL_OUT0, CTRL_OUT1 to CTRL_OUT3, CTRL_OUT6 to CTRL_OUT4, CTRL_OUT7
EN_AGC - ground
GPO_3 - open
CTRL_IN0 - CTRL_IN3 - ground
CTRL_OUT 0-7 - open
Retrieving data ...