who can give me a script with setting the CP bypass mode .
I saw the UG-237 it says just set the register CP_COMPLETE_BYPASS_IN_HDMI_MODE, IO, Address 0xBF to 1
Just so easy?
What did you put in your EDID? No EDID means that the part defaults to DVI mode *and* DVI is RGB only so if your source is sending YCbCr, the colors would probably look all purple. That might be the issue for both problems.
Yep... that easy. What are you trying to do?
Now i use adv7619 as receiver ,and displlay to monitor ,The display color is different from the source ,So I think the CP maybe do something with the video,but if I set cp to bypass mode as descript up .and then it displays nothing on monitor.
Another strange ,the input video is HDMI mode ,but i read the register
A readback to indicate whether the stream processed by the HDMI core is a DVI or an HDMI stream.
0 - DVI Mode Detected
1 - HDMI Mode Detected
this bit is 0 which indicate DVI mode viceo is detected.Why?
Retrieving data ...