I want to use the ADUM5000 for standalone isolation. want to ask how will I connect for PWM for connection to the RCout pin. the RCin is grounded GND. Primary 5V, Secondary 3.3V.
Akin: For ADuM5000 standalone operation, the RCsel pin should be tied High, the RCin pin should be to GND, and the RCout pin has internal PWM signals and should be left open.
Is it normal that the Adum5000 gets really warm. I would rather say hot during the procedure. Or did I something wrong with the pin connection. I only connencted on each side one of the gnd1 pins with gnd because they are already internal connected. Is that allowed?
Retrieving data ...