I would like to use the ADs of the AD9670 at a speed between 6MHz and 8MHz. I would use an external antialiasing filter.
Would that be possible? Has someone tryed on a demonstration board to use these kind of acquisition speed?
Thank you, Antonello
The AD9670 cannot support 6MHz and 8MHz sampling unfortunately. Are you looking for an octal ADC with that capability? What are your other target specifications? SNR? The AD9252 or AD9257 could be good options.
Note of clarification, the AD9252 and AD9257 do not guarantee performance at 6MHz and 8MHz but at nominal conditions will likely work.
Thank you for the information. What is the minimum conversion rate
for the AD9670 could be used. Eventually without using the
clock duty cycle stabilizer that could be frequency sensitive.
Il 13/03/2014 02:09, ginak ha scritto:
Re: AD9670 converter speed created by ginak <http://ez.analog.com/people/ginak> in /DataConverters/ - View the full discussion<http://ez.analog.com/message/135898#135898>
Re: AD9670 converter speed
created by ginak <http://ez.analog.com/people/ginak> in /Data
Converters/ - View the full discussion
The AD9670 can support down to 20.5MHz.
Retrieving data ...