Im looking to build a couple of features but not sure where to start, There are a lot of blocks to choose from lol
Here is what I'm looking to do,
First I want to monitor my input signal and if it goes above a set level after say 3 seconds i want it to reduce that level back to a pre determined safe level until the incoming level is reduced.
The second thing is monitoring the same input signal and if that signal doubles in level in say .5 second i want to mute the outputs for 5 seconds
Looking at the mute block i see it has to be set as either on or off so I'm guessing that i will need to have another block that can be controlled and switch the output from the signal to the mute block
Thanks in advance