We are using both ADIS16485 and ADIS16375.
We have succeeded to activate the ADIS16485 IMU with our Controller.
We have made some dynamic tests on the IMU calibration jig and got reasonable results.
We could not make the ADIS16375 unit work in the same environment.
The unit does not provide any outputs – the data lines are all dead.
We are using the same exact set-up for both ADIS16485 and ADIS16375.
NOTE: The ADIS16375 seems to be responding properly when mounted on the ADI Evaluation board, it is obvious that we are doing something wrong in our platform.