Can we input YPbPr to CSC , convert RGB and output ?
The ADV7625 and ADV7626 are very similar from a register map perspective.
The I2C addresses, functions and most of the values are the same. Certain register values e.g. any controls for port C, port D and port E will not be valid in ADV7626. We will be uploading ADV7626 documentation in the coming weeks - it is currently in development. Until then, please continue to use the ADV7626 datasheet and the ADV7625 extended documentation (hardware manual, software manual etc)
Are you talking about ADV7625 Right?
Your subject says it is ADV7525.
If it is ADV7625, then please refer hardware manual section 9.10 HDMI TX COLOR SPACE CONVERTER section gives details regarding this.
It is possible.
Note : The Colour Space Converters are not available when the ADV7625 is configured in Mux Mode.
Changed subject to reflect question is about ADV7625, not ADV7525.
Thank you for your advice.Asked product is ADV7625.I will check 9.10 HDMI TX COLOR SPACE CONVERTER.
I would like to evaluate ADV7626 but my information is datasheet only.ADV7625 has some document for evaluation.So, we will evaluate ADV7625Regarding to above I have some question about below.Please let me know your advice.
Question 1 Is Register between ADV7625 and Adv7626 the same ? (Address, function, setting value and so on)
Question2 Datasheet only is uploaded for ADV7626. http://ez.analog.com/docs/DOC-10767
Adv7625 has hardware manual, register control manual and evaluation board document as below ・ADV7625_HW_Manual_RevPrB_31May2013.pdf ・ADV7625_Register_Control_Manual_RevPrC_12Apr13.pdf ・ Evaluation board document.
Please let me know when you have plan to upload above document for ADV7626.If you will upload in the near future, we would like to evaluate ADV7626.
I think your all your questions has been answered, could you please check once and close this?
I close it.Thank you for an answer.
Thanks very much for closing the item
Retrieving data ...