The PLA on the ADuC702x parts is configured via MMRs (Memory Mapped Registers).
Is there a easy way to find out the values to be written into this MMRs or is it
required to digg out any detailed bit from the datasheet.
And don't forget to mention that the PLA Tool will also give you code snippets for the register settings of the MMRs.
The easiest way is to use the graphical tool called "ADuC PLATool".This is normally installed on the PC with the evaluation SW available with the ADI Evaluation-Boards for the ADuC702x-familiy of products.
Can PLATool be installed on a PC with Vista? I have downloaded "PLATool_v2.2_setup", but always get a message saying that installation has failed. If so, how do I do it? I have tried installing it on a cold boot with no other apps running. I have admin priveleges. Also during install I get this message:
This setup requires the .NET Framework version 1.1.4322. Please install the .NET Framework and run this setup again. The .NET Framwork can be obtained from the web. Would you like to do this now?
I had done exactly that, but the version available is 4. Shouldn't the tool be compatible with newer versions or can it be made to accept them? I tried reinstalling PLATool after installing .NET v4 but the same message comes up. What is the proper installation procedure? Must I download an old version of .NET somehow, uninstall version 4, install the old, install PLATool, and then install version 4?
I am running Windows 7 x64 Enterprise and have installed version 2.5 of the PLA Tool. It seems to work fine for me so I suggest that you use this version instead of 2.2.
Retrieving data ...