AnsweredAssumed Answered

Migrating from ADG1606 to ADG726

Question asked by tklein on Jan 31, 2014
Latest reply on Feb 4, 2014 by tklein

Dear EngineerZone Experts-

Thanks in advance for your help. My team is currently using two analog multiplexer ADG1606 chips to control 31 signal channels. The PCB power is +/-5v. Due to some new design specifications, we will now power the PCB with a single 5v supply and therefore have decided to migrate to ADG726 or something similar. This time, we are looking for 65 channels total. After looking through the datasheet for ADG726, I have some questions:

 

1) We have a 2.5v reference from our ADC/DAC chip, but overall PCB ground must remain at 0v. Which voltage should we choose for GND on this chip?

2) It looks like pins 13 and 14 are both VDD. What is the reason for that?

3) We want to reduce leakage current as much as possible. Are we better off selecting 726 over 732? If there is no difference in performance then 732 may be simpler.

4) Since we need 65 channels overall, I wonder if there is a single switch with the same characteristics (especially parasitic capacitance)? Maybe there is a whole family of chips that behave the same as this one.

Outcomes