AnsweredAssumed Answered

Problem Booting from Target when using AD193XX module

Question asked by J_Rucker_00 on Jan 23, 2014
Latest reply on Feb 11, 2014 by JJoseph

I am hoping someone can help me with this problem.


I am using external ADC's and DAC's, so I have the AD193xx controlling all my clocks for those devices.


I can boot from a target file whenever i create a schematic. While creating the schematic, if I add and configure the AD193xx from the hardware module, I am still able boot from the target file as long as I don't close the window. 


However, if I close the window, load the saved schematic, then to boot from the target, nothing happens. It seems that I cannot get any saved file with the AD193xx to boot from the target. If I want to use the AD193xx module, I have to manually add it and configure it every time.


I am using the ADSP21469 EZ Kit with Sigma Studio.


Any help would be appreicated.