board: BF506f EZ-KIT Lite rev 1.0
program: Power_On_Self_Test from examples for that board
switches and jumpers settings: as described in readme.txt of Power_On_Self_Test
Power_On_Self_Test successfully reads CID,RCA,CSR,SCR registers, but does not read SSR.
Program stops forever in while(!(*pRSI_STATUS & DAT_BLK_END));
RSI_STATUS == 0x00000002 at this moment (DAT_CRC_FAIL sets up)
By commenting out SSR reading, I had same error in next test (zero-write).
That was tested with several sd-cards, result was same.
Why it can be so?
Maybe i'm doing something wrong...