I use the ADV7619 for video receiver,and output the video to DSP.
input formats are 2560x1600 @60Hz and 3840x2160@30Hz
I saw the ADV7619 spec and I found output TTL 48-bit pixel interface :
the output on the pixel bus consists of two 24-bit buses running at up to 150 MHz: one bus contains the even pixels, and the other bus contains the odd pixels.
p0-p23 -----even pixels is 1,3,5,7,9......;p24-p47 odd pixels.0,2,4,6,8.......
I don't want this mode
if input format is 2560x1600 @60Hz
i need that p0-p23 are output 0,1,2,3,-----1279 and p24-p47 are output 1280,1281,1282------2559,
How should I set up?