In help documentation of adi_mt9m114_ConfigTWI is noted that "Prescale value to get the TWI clock from system clock (fSCLK). Prescale value can be computed using: PRESCALE = fSCLK/10MHz."
But in example "VideoLoopbackYUV" in sensor.h prescale value described as
/* TWI Prescale value (Assuming 300Mhz system clock) */
#define ADI_MT9M114_TWI_PRESCALE (8u)
However, proceeding from the formula there must be 30.
This is a mistake or I don't understand the mechanism of TWI prescale calculation?