You will find some instructions on how to boot from flash available in the VisualDSP++ installation. You can find it here: C:\Program Files\Analog Devices\VisualDSP 5.0\Blackfin\Examples\. Its called 'Booting from Flash readme.txt', which i have also attached to this email.
In addition the following FAQ may be of use as its discusses how to debug a program loaded to flash:
FAQ: How to debug a target board which boots from Flash?
Could you please repost your question in English - we are unfortunately unable to offer support in other languages. You may prefer to use our Chinese EngineerZone.
When I developed programs on bf561,I encountered a problem.The phenomenon is as follows:
When I built the program as executable files,and then debug the program with emulator,the program executed accurately;But when I built the program as loader file,and download the loader file in the flash memory,and then restart the board,the board reset constantly.In this case ,when I deleted some codes in my program,and rebulit the program as loader file again,and downloaded the program in the flash memory,the board was no longer reseting,and executed accurately.But I don't want to delete the codes,can you tell me what can I do.
Retrieving data ...