We are using ADSP-BF548 in one of our project.
Ez Kit Lite: ADSP BF548 EzKIt lite rev 1.2
IDE version used: CCES v1.0.2
For Hardware testing, a simple test code is implemented which tests the basic interfaces UART0, SPI1, SPORT2 and SPORT3. A simple loopback is performed on the interfaces over a terminal. After several cycles of loopback testing we are getting the following message on the terminal:
"No space to do runtime checking on rules 17.1, 17.2 and 17.3 (suppress checking!)" and the processor hangs.
I went through the thread http://ez.analog.com/message/44753#44753, and verified that my MISRA-C rule checking is disabled.(in properties -> CrossCore Blackfin C/C++ Compiler -> MISRA-C -> "Enable MISRA-C conformance checking" is unchecked)
Please suggest on how to disable the MISRA rule check.