AnsweredAssumed Answered

ADV7611 and ADV7511 pixel port setup

Question asked by cmay on Nov 14, 2013
Latest reply on Nov 21, 2013 by GuenterL

Hi,

 

I have some questions about the Analog Devices ADV7611 and ADV7511 HDMI devices. I am trying to configure the devices to output and accept 10 or 20bit 4:2:2 YCbCr video streams. Can you let me know which register settings I should use to correctly setup the pixel ports on these devices?

 

For the ADV7611:

OP_FORMAT_SEL[7:0] register could be set to 0x91 or 0x8D.

OP_CH_SEL[2:0] - ?

 

Can you send me the register spec for the ADV7511 device, along with the suggested register settings.

 

I plan to use the devices with the following video formats:

 

480i59.94Hz(NTSC)

576i50Hz(PAL)

720p50Hz

720p59.94Hz

1080i50Hz

1080i59.94Hz

1080p50Hz

1080p59.94Hz

 

Thanks


Chris

Outcomes