I encountered an issue while programming LDR to SPI flash on bf609 ezboard with the flash driver in BSP
cldp.exe -proc ADSP-BF609 -emu hpusb -driver bf609_w25q32bv_dpia.dxe
-cmd info -cmd prog -erase affected -format bin -offset 209715
2 -file Power_On_Self_Test.ldr -cmd compare -format bin -offset 2097152 -file
Target SDU Blackfin Emulators/EZ-KIT Lites
Platform ADSP-BF609 via HPUSB-ICE
Error: couldn't find DPIA buffer address
Error: could not allocate storage for the buffer 0xD.
Error: Error: There was a problem with one or more
required expressions in the driver. Please make
sure the following expressions are present and
Error: driver load failed.
Both the BSP and the cces is 1.0.2 . i think this driver should be ok for the board. any suggestion ?