AnsweredAssumed Answered

Operating AD-FMCOMMS1-EBZ on VC707

Question asked by steve_c on Sep 30, 2013
Latest reply on Nov 25, 2013 by steve_c

Hi, I’m attempting to setup the FMCOMMS1 to a Xilinx VC707 through either of the VC707’s HPC connectors by following the quick start guide at http://wiki.analog.com/resources/eval/user-guides/ad-fmcomms1-ebz/quickstart/no_os_microblaze.

 

 

However, there is no reference design available on the VC707 directly to use the drivers for the FMCOMMS1 listed at http://wiki.analog.com/resources/fpga/xilinx/fmc/ad-fmcomms1-ebz/reference_design_no_os. This was confirmed by ADI’s technical support. However, technical support also said the VC707 should work with the FMCOMMS1.

 

 

In this case, how would I go about operating the FMCOMMS1? Are the files on GitHub at https://github.com/analogdevicesinc/fpgahdl_xilinx/tree/master/cf_xcomm_vc707 sufficient to connect a MicroBlaze processor to one of the HPC connectors' pins and run the No-OS drivers?

 

Thanks,

Stephen

Outcomes