can anyone have the fmc pin details of fmcomms1-ebz rev-b and also code to interface fcomms1 board with zedboard???
You can find the FMC pinout of the AD-FMCOMMS1-EBZ in the schematics. How these pins need to be mapped on the ZED board can be found in the system.ucf of the AD-FMCOMMS1-EBZ reference design for the ZED board.
I am following the discussion..I am working on zedboard with ad-fmcomms1-ebz..My need is to transmit digital data from zedboard through fmc to ad-fmcomms1-ebz and receive the transmitted digital data..I have schematics of zedboard FMC and schematics of FMC pinout of ad-fmcomms1-ebz..I am quite confused about assigning pins...Which schematic should be considered (zedboard or ad-fmcomms1-ebz) for assigning pins..I also have xdc file for zedboard..Is that enough to make changes in xdc to transmit data through fmc of zedboard or any separate interface program should be used...help plz...
The exact pins used for the FMCOMMS1 / ZedBoard with our reference design can be found at:
Thank you ...Could u help me with the simple example or steps to check or verify the program by transferring data through FMC of zedboard to ad-fmcomms1-ebz and then check the output by assigning pins in FMC of zedbaord???..Kindly help me how to start with....
Due to high customer support requirements, we can not go beyond our examples in terms of support.
If you have problems running our projects please ask, otherwise we might not be able to support your personal projects.
Retrieving data ...