In AD9889B Programmer's Guide, It says Register 0x98 must be written to 0x03 for proper operation.but in there have someone say Register 0x98 must be written to 0x07 for proper operation. Please tell me How to set this register。
Please use the most recent revision of the programming guide: Rev B from December 2011. which you can find on the design support files page here: http://ez.analog.com/docs/DOC-1741
It will have the updated recommended settings.
Also note that this product is not recommended for new designs, and support for it is limited. New designs should be using ADV7511 or ADV7513.
It's 0x07 in the Programming Guide I have, where do you see it must be 0x3?
Thanks a lot!
It's 0x03 in the AD9889B Programmer's Guide 10-03-06.PDF.
Below is the register value in my project.
What suggest do you have something?
Thanks again for your help！
Retrieving data ...