I have a question about ADV7511W.Could you tell me the input capacitance(pF) of the SDA and SCL pin?
Remember I2C is a very slow line, If your total bus loading exceeds 400pF then you can decrease the pullup value to compensate. I2C is very tolerant and is only dependent on the RC time constant.
The SDA/SCK load capacitance is not specified. We have not seen any issues due to capacitive loading. I would try to extract the information from the IBIS file.
Thank you for your reply.When you can get the information, please let me know it.
I found the IBIS file. Please refer attached file.The input capacitance(pF) of the SDA and SCL pin is written to 3pF on the line 111.Can we use "3pF" for the input capacitance of the SDA and SCL pin?
Thank you very much.
Retrieving data ...