Previously we posted ADV7611 WUXGA setting on the EZ,
refer to "http://ez.analog.com/thread/19919?start=0&tstart=0" titled "ADV7611 WUXGA problem".
And we received the following answer.
Setting of WUXGA with reduced blanking for ADV7611 in free run mode:
PRIM_MODE = 0x6
VID_STD = 6'b011001 (0x19 hex)
A question in this time is ADV7623 WUXGA setting.
Should we set VID_STD = 6'b011001 (0x19 hex) also or keep default (VID_STD = 6'b000010 (0x2 hex))
for ADV7623 WUXGA in free run mode?
We use the device driver "DVP_SW_7623_7622_R1.5_20110411.zip".
Thanks in advance,