AnsweredAssumed Answered

Access data from NAND

Question asked by sujan5614 on Aug 5, 2013



I am working on a custom board, which has a Blackfin BF548, a CPLD and a NAND Flash.

For reference I have ADSP BF548 Ez Kit Lite rev 1.4 and CCES ver


How can I make two partitions in the NAND flash?

On one of the partition will reside the boot data(executive kernel), and on the other will reside some configuration data for my on-board CPLD, which will configure the CPLD every time the board is powered on. The CPLD is connected to the EBIU.


Please guide me so as to accomplish the above requirement.


Thanks & Regards

Sujan Nag