How to calculate Power using Energy registers & Line Accumulation Cycle mode in ADE7753.

Can Power factor (PF) can be as ratio of Active Energy & Apparent Energy?... as it is

- ratio of Active Power & Apparent Power
- cosine of phase angle

Any kind of help is appreciated.

Nikita

Hi Nikita,

the power is the energy accumulated in 1second. So you can use the line cycle accumulation mode to accumulate energy for 1 second and the values obtained the LAENERGY, LVARENERGY and LVAENERGY will represent the powers.

Then the power factor can be computed easily.

Regards

Petre