Sorry , I have some stupid question. If I use SigmaStudio to export system files. Have the Hex files contain hardware setting and function setting in the files or not?
The short answer is yes, the export files contain all parameters set up in your schematic, as of the latest Link-Compile-Download.
For example, this circuit exports these parameters (found in the middle of its TxBuffer export file) when the volume control is at max, as shown:
0x00, 0x00, 0x00, 0xFF,
0x00, 0x02, 0xAA, 0xAE,
0x00, 0x80, 0x00, 0x00,
Sliding the volume control down 20dB results in a different export:
0x00, 0x0C, 0xCC, 0xCD,
Thank you for your help. But the hardware setting , for example : I2S interface format setting. It will contain in hex file ?
Yes, the core register values for such settings will appear in the HW Configuration section of the exported data.
Retrieving data ...