AnsweredAssumed Answered

ADCu7060 using external reference

Question asked by Apogee on Jun 25, 2013
Latest reply on Jun 27, 2013 by AudeR

We are using this device with an external reference of vref- = 0V and vref+ = 2.5V


If I set the HIGHEXTREF bit of adc1con I am only getting half my range.


If I do not set this bit I am able to use the full range.  However I am not getting the readings I expect.


What is the proper configuration for this register using these voltages


These are my other settings for adc1con

adc1conDefaults = BIT15 + BIT11 + BIT4