I have to translate some signals from +14V to +3.3V. They are very low frequency signals. Can you suggest me any level translators ?
The ADG3123 is the only High Voltage level translator that we have.
I believe that it is possible to use this part in the manner you have described above, but we have not tested it with inputs above 5.5V and don't have any information on how the datasheet specifications will change.
These are the recommended voltage levels:
VDDB >= 14V
VDDA = 4.3V
GND = 0V(ground)
VSS = I don't know what your system will use here, but it should be the lowest level.
Pins Y1 to Y6 will output ~3.3V for a 14V input and Pins Y7 & Y8 will output ~13V (depending on VDDB).
Retrieving data ...