I am using ICE-100B emulator for debugging custom made ADSP-BF518F processor. But when we are running ICE test utility, we are getting an error at the step of Determining scan path. Please guide me regarding this issue.
Please refer to either one of these two EE-Notes, depending on whether you are using CCES or VisualDSP++:
EE-356: Emulator and Evaluation Hardware Troubleshooting Guide for CCES Users (Rev 1, 09/2012)
EE-175: Emulator and Evaluation Hardware Troubleshooting Guide for VisualDSP++ Users (Rev 13, 09/2012)
Both of which, along with the associated files, are available for download from: http://www.analog.com/en/processors-dsp/blackfin/products/application-notes/resources/index.html
Furthermore, since you are using a custom board, it is also recommended to consult Analog Devices JTAG Emulation Technical Reference ( EE-68: Analog Devices JTAG Emulation Technical Reference (Rev 10, 04/2008) ) for details of the JTAG specification and to ensure your board conforms to this standard.
Thank you for you speedy reply.
The problem was due to improper VDDINT Voltage. After rectifying VDDINT voltage, now I am able to connect to the target board.
Thank You once again
Retrieving data ...