Hi ADI Support,
I have a technical question in reference to BF561. Does both PPI port of BF561 the PPI0 and PPI1 have same priority and data through-put performance.
When I have connected two devices one at PPI0 and the other on PPI1 and the device on PPI1 is producing double much of data what do you recommend? In my application I have one device that produces 8 Bit at a clock rate of 20 Mhz and the other one on PPI1 produces 8 Bit data at a clock rate of 40 MHz. Does both have same priority or do you recommend to swap both devices?