I've got a question about the clearing interrupts for UART_TX, and UART_RX in DMA mode.
Is is necessary read the DPI_IRPTL register to clear those interrupts?
Or, what is necessay to do?
*pPICR2 &= ~(0x1F); //Clear DAI2I interrupt from P12
*pPICR2 |= (0x15); //Sets the UART0 transmit interrupt to P12
*pPICR3 &= ~(0x1F); //Clear SPIB interrupt from P18
*pPICR3 |= (0x14); //Sets the UART1 receive interrupt to P18
Thanks for answer