Hi Sir ,
Could you please send us some related file for VisualAudio & Matlab Interface ? Thanks .
(please don't send us the website's link)
Windy wrote: Hi Sir , Could you please send us some related file for VisualAudio & Matlab Interface ? Thanks .(please don't send us the website's link) Best regards,Windy
You may or may not be aware, but the VisualAudio tools were discontinued as of version 2.6. Unfortunately the VisualAudio tools are no longer supported by ADI.
The correct support route for questions regarding VisualAudio is now through the engineers at DSP Concepts, who were our main partners in the development on VisualAudio:
The product we would recommend for new project is AudioWeaver, also from DSP Concepts.
There are a couple of old 'Learning and Development' modules, which are no longer available on our site, but are still available through Demos On Demand which provide an introduction to VisualAudio, and an Advanced VisualAudio discussion, including interfacing with Matlab. These are available via the following link:
Again, as Visual Audio is no longer supported, we would recommend looking at current alternatives, such as the AudioWeaver Tools. AudioWeaver allows real time tuning using Matlab scripts, as well as development of custom modules using Matlab. You can find more information on the AudioWeaver site.
Hi Craig ,
Thanks for your explaination , and we notice that ADI have the file for VisualAudio & MATLAB Interface ,could you please send this file to us ? Thanks .
We have check the file , it should be" VisualAudio Matlab Interface Guide" from the lastest version , could you please send it to us ? thanks .
you are correct, this file appears to be missing from VisualAudio 2.6, however I am attaching a copy from my VisualAudio 2.5 installation. Please let me know if there is anything further that you need.
I read the pdf file , but i can't find matalb demo files ,can u send me the demo files? thanks a lots
Hi Sir ,
the attatchment is too large to sent here , pleas send your email add to me , I will send you by email.
The matalb demo files,May I get one copy.My Email:firstname.lastname@example.org.Thankyou!
Have you installed VisualAudio 2.6? If so, which files are you missing? I may be able to locate them, but would like to advise (again, as it was stated upthread) that VisualAudio is no longer supported by ADI. If you can let me know what you're looking for, and I can locate the files/examples I will provide them.
I Have installed VisualAudio 2.6 And want to connect to Matlab.I don't kown what should I need to do .
lenjohn sai:"matalb demo files",I can't find it.
Please refer to the PDF file in my previous post, which details how to use MATLAB with VisualAudio. Note that the Matlab API is installed as part of the 2.6 installation at "...\Matlab\".
Unfortunately I am not sure which files lenjohn was referring too - hopefully they may be able to advise and provide those files, if they are not already included in your 2.6 installation.
I would very much advise, as per the first post, looking into Audio Weaver as an alternative. This is not an ADI product, but is similar to VisualAudio, and a current product (where VisualAudio is obsolete).
Just for information, if you are looking for the alternative for VisualAudio, AMI technologies (http://www.amitekh.com) has come up with one more tool called AMI Designer(Audio Modules Interweaver) and it follows the same design of VA to support the customers easily but with rich features. You can contact them by email@example.com
Here are the platforms supported in this rapid prototyping system.
Analog Devices 21262 EZ-KIT
Analog Devices 21364 EZ-KIT
Analog Devices 21369 EZ-KIT
Analog Devices 21469 EZ-KIT
Analog Devices 21489 EZ-KIT
Analog Devices BF527 EZ-KIT
Analog Devices BF533 EZ-KIT
Analog Devices BF537 EZ-KIT+ Audio Extender
Analog Devices BF548 EZ-KIT
Analog Devices BF561 EZ-KIT
Retrieving data ...