I am using ADV7181c chip on my device and want to capture 1080p25 resolution.I am able to detect it but not able to capture it.
I need script (Register settings) to be done for the same.
Here's a set of scripts I got from the expert with the following statement: "Customers can use them as a starting point to develop their own scripts, but they have to keep in mind that no evaluation was done with those scripts. These modes are non standard for the ADV7181C, so we can only provide very limited support for them."
Here you go.
The attached document has no settings for 1080p25 (Actually it does not have settings for any resolution of 1080P). Please provide me the same for 1080p25.
I am attaching the settings which i am using for 1080P24 and 1080P30.
Unfortunately I don't have a specific script for 1080p25. I'd start with 1080i/50 YPrPb..... and make sure I'd set DDP_CP_64 = 0 to process 1080p/25.
This device will do not do 1080p60, It only has 110MHz ADCs. To do 1080p60 you need 170MHz ADCs. 1080p25 should only be 74.25MHz.
I'll check with the ADV7181C expert to see if he has a script for 1080p25
Thanks for sharing the script . It is working fine for me .
Retrieving data ...