AnsweredAssumed Answered

U-boot in bf537-stamp console mess up when loading uImage

Question asked by dbueno-baques on May 24, 2013
Latest reply on Jun 6, 2013 by dbueno-baques

Hi:

 

Probably this subject was already discussed but I'm not able to find any thread for it. Here is the thing:

 

After updating the u-boot in a bf537-stamp board to the 2012.07 following the procedure in http://docs.blackfin.uclinux.org/doku.php?id=bootloaders:u-boot:upgrading and after that transferring the default uImage (downloaded from http://blackfin.uclinux.org/gf/project/buildroot/frs), when loading the image (bootm 0x1000000) the console at certain point goes just mess up. Characters output like being at the wrong baudrate!?

 

I will really appreciate any link to a previous discussion, hints, solutions, anything. Probably this has certain relation to the Das U-boot corrected feature mentioned by Zhang in https://blackfin.uclinux.org/gf/project/buildroot/news/?action=NewsThreadView&id=204.

 

Thanks in advance.

 

D. Bueno

Outcomes