This query is regarding ADSP BF548 EZ KIT-LITE. Could someone please share me the instructions for how to flash my code in Serial SPI Flash, to run it in standalone mode, using CCES.
Programing via the debug agent is possible. You still need to specify '-emu' switch, however, instead of specifing an emulator simply enter KIT. If you type cldp -emu from the command line a list of supported emulators, which includes KIT, will be displayed.
I hope this helps.
CCES uses a Command Line Device Programmer (cldp) which is invoked from a Command Prompt. Details on how to use this can be found in the following FAQ:
FAQ: How do I program flash on my target board using CrossCore Embedded Studio?
If you haven't already done so, you can download the ADSP-BF548 EZ-KIT Board Support Package software, which includes the serial flash driver, from the following location:
Once installed you will find a readme.html file with further details. This is available at the following location:
Thanks for your reply Colin.
I went through the links you provided. Luckily I had an ADZS-ICE-100B emulator, and it worked.
Thanks a lot.
Do I need to have an Emulator to program my Board using CCES. I was able to program the Board using USB Debug agent in VisualDSP++. I would like to do the same using CCES.
Please guide me through.
Retrieving data ...