AnsweredAssumed Answered

Failed to build Linux with HDMI video output on the ZED board

Question asked by z-trf on May 20, 2013
Latest reply on Nov 15, 2013 by rejeesh

I've tried to follow the tutorial described on the webpage,

 

http://wiki.analog.com/resources/tools-software/linux-drivers/platforms/zynq

 

attached to build ubuntu on zedboard with adv7511. However, after running the u-boot and load the kernel, the following error got and the kernel hangs,

 

** Unable to read "ramdisk8M.image.gz" from mmc 0:1 **
## Starting application at 0x00008000 ...
Uncompressing Linux... done, booting the kernel.

Error: unrecognized/unsupported machine ID (r1 = 0x0fb71dd0).

Available machine support:

ID (hex)        NAME
00000d32        Xilinx Zynq Platform

Please check your kernel config and/or bootloader

 

I've exactly followed the tutorial. All the u-boot.bin, zImage and devicetree.dtb are successfully built.

 

Any suggestion what's wrong?

Outcomes