Good Day everyone!
I was wondering if I can use UART0 and UART1 of BF537 EZ-kit lite at the same time? I would like to use both of the UARTs without changing the board settings.
Yes, they can both be used. The UART1 signals, as detailed on page "2-4" of the Evaluation System Manual, are shared with the push buttons SW12/13, so these need to be disabled through the push button enable switch SW5. After doing so, the UART signals will be exposed through P12. See the Schematics in the aforementioned manual for pin out details.
Retrieving data ...