AnsweredAssumed Answered

ADV7611/ADV7513 Repeater Driver

Question asked by Nikkee on May 12, 2013
Latest reply on May 16, 2013 by Nikkee

Hi,

 

We use ADV7611/ADV7513 Repeater Driver in our set.
1) We set PRIM_MODE=0x06 and VID_STD=0x19 when WUXGA input signal is detected.
    It is no problem.
2) We set PRIM_MODE=0x06 and VID_STD=0x02 when other input signals are detected.
    It is no problem.
3) We set PRIM_MODE=0x06 and VID_STD=0x19 when a input signal is changed to WUXGA from other signals.
    A problem occurs.
4) We set PRIM_MODE=0x06 and VID_STD=0x19 after applying "ADIAPI_RepRxResetSelectedPort" in "main" of the repeater driver

    as the workaround of 3) when a input signal is changed to WUXGA from other signals.
    It is no problem.
    Is it correct or is there other additional actions?
5) Could you tell me the detail function of "ADIAPI_RepRxResetSelectedPort"?

 

thanks in advance,

 

Nikkee

Outcomes