Is the AD9467-FMC-250EBZ compatible with the xilinx Artix 7 FPGA AC701 development board?
Yes, it will work fine. You can use the ADC pcore as it is- use a BSB to start with and then add the pcore. You will also need to remap the pins.
I checked with the applications engineer for the AD9467 and he provided the following feedback:
The AD9467FMC-250EBZ has firmware that can make it work on the following platforms:
If the FMC connections on the AC701 follow the same scheme as these boards above, the AD9467FMC-250EBZ should work with some HDL modifications.
I also moved this question to the FPGA Reference Designs Community so hopefully someone here can provide more details.
EngineerZone Support Community Manager
Thank you very much for the quick reply.
Retrieving data ...