How can I vary the color output saturation (Cb Cr). I am using an HDMI input to the device.
If you are using the CP and the video is in YCbCr format then enable color controls with VID_ADJ_EN=1 and adjust the colors with CP_CONTRAST, CP_STAURATION, CP_HUE & CP_BRIGHTNESS controls.
We are using HDMI input so the mentioned adjustments in USER MAP 1 of
registers 9E and 9B have no affect on output.
On Thu, May 9, 2013 at 9:58 AM, GuenterL <
Do you have the CP_CSC_EN enabled? Check out section 5.2 and Figure 37
Retrieving data ...