I have checked all ports of ADuCM360 and found P0.7 not working? Is it a special port?
I am using IAR 6.5.
Attached you can find the used programm code.
I tried to clear P0.7 and I tried to toggle P0.7. But he is always HIGH.
0.7 if you look in the GPMUX table in the userguide is by default a POR pin.
In order to use it as gpio, the bits for the pin 7 in GP0CON must be set to b01 (they are b00 by default)
You can do this with DioCfgPin(pADI_GP0, PIN7, 1);
Retrieving data ...