I use the AD9833 eval board connected to SDP-S controller board, windows 7
I installed the software and drivers, connected the board to the usb port, the device manager found the hardware, everything seems to be ok.
The problem is that the AD9833 rev0 software hang itself after a while. I have to use the taskmanager in order to terminate the program.
Same thing all the time, the program does not respond after a short while
The program was supplied on the cd included in the EVAL-AD9833SDZ evaluation kit
I tested the program on 3 different computers, even one with windows XP, same result.
Is it possible to get a newer revision of the program? any suggestions how to solve the problem?