i want to download hex file into aduc7026 using uart serial down loader armwsd.. but after the "press download and pulse reset button" it was not responding.................
please solve my problem
If the last character is "I" and not "1", than you have a I-type - this means bootload is done via I2C and not with UART.
For details see:
And you may need to use the required adapter:
Can you please tell me the exact part number you are using? (Printed on the silicon)
Also were you able to establish UART communication with the pc by downloading an UART example?
thank you for reply..
i am using aduc7026bstz621 IC.
to download the program i am using armwsd..
i did the configuration settings..
and using p0.7&p2.0 pins as rxd and txd,
adm3202 for line driver..
i have a doubt..
is p0.7 and p2.0 are act as sin and sout pins at the time of reset...
or i have to use only p1.0 and p1.1 pins to communicate with armwsd....
You can only use P1.0 and P1.1 for the factory boot loader.
thank you MMA..
sorry to i have not observed 'i'.
Retrieving data ...