AnsweredAssumed Answered

ADV7511 reference design FSBL

Question asked by milosoftware on Mar 4, 2013
Latest reply on Mar 4, 2013 by milosoftware

I was trying out the reference design on the zc702 board. I cannot get it to work, probably because the FSBL part is broken.

 

The FSBL binary "cf_adv7511_zc702.elf" in the tar.gz is a whopping 2.6MB, that cannot be right. Usually this is less than 300k. Creating a BOOT.bin from this file and a 270k u-boot bin, and NO bit image creates a 2.7MB BOOT.bin file, which fails to boot.

 

This is the download I'm talking about:

http://wiki.analog.com/_media/resources/fpga/xilinx/kc705/cf_adv7511_zc702_edk_14_4_2013_02_05.tar.gz

Outcomes