Have read all posts on this topic to no avail.
Have checked all the addresses and sizes in uVison 4, using Ulink2 adaptor to load
Any help please...
Yeah you're right, it's setup for an aduc7028.
But it works at my desk with an aduc7026 board. (The 2 devices are from the same family so it doesn't make a difference which one is actually selected).
I have 2 more suggestions. Do you have a Midas-link around that you can try it with?
Second suggestion is: Can you do a mass erase with ARMWSD?
Is this an evaluation board from Analog Devices or is it one that you made yourself?
Did the board work at all in the past?
Can you go to options for target, can you post screenshots of the flash download septup window (This can be opened by clicking settings in the utilities tab).
And can you also post screenshots of the utilities tab, the debug tab and the window that comes up when you press settings in the debug tab.
P.S. I just took a sample project from the CD and modified it to use ulink2 and it worked fine on my setup.
Hi and thanks...
I think this is everything in 2 fotos..
Can you try this sample project and see if you can mass erase and download as I just verified it to work on my machine with a ULINK2.
What is the EPN570 device showing up? could that be causing an issue?
This project will not work, its for a different device??
The EPN570 is an Altera chip which can be loaded ok through the altera jtag box
The board is our own and for the last 2 years we use the ARMWSD with no problems.
I have just erased using the ARMWSD then tried to program using the ulink2
On the Flas Download Setup i noticed that the start address and length of RAM was wrong so have changed it to START=0x10000 LEN=0x2000
but still does not work
is there an update to the program...ADuC702X Flash(v1.1) program??
Ok Problen now fixed...re-entered all the data again did an update and it started working...Thanks
I have rebuilt for my device and i still have same problem as my project
Retrieving data ...