On the ADV7182 which has priority the PWRDWN Pin or the PWRDWN Bit?
The PWRDWN Pin and the PWRDWN Bit ( main map, register 0x0F, bit ) are both used to program the ADV7182 to enter power-down mode.
The PWRDWN Pin always has priority over the PWRDWN Bit.
When PWRDWN pin is tied high: the part enters/exits powerdown mode according to the PWRDWN bit.
When the PWRDWN pin is tied low: the part remains in powerdown mode regardless of the PWRDWN bit.
How much time does it take from Power Down state to Normal Operation when control(PWRDWN Pin and the PWRDWN bit) changed from On to Off?
Since this is a separate question I have posted it on a separate thread.
See link below:
Retrieving data ...