I would like to use ADL5391-EVALZ to multiply 2 signal (single ended) and Ican't find a user guide for it. Could someone help? Thanks
Unfortunately, there is not a user guide for the ADL5391, but it should not be too hard to set up the evaluation board (as seen on page 13 of the datasheet).
You can drive the part either single ended or differential. You have the option of using the baluns on the board. Just apply your signals to the X and Y inputs and power up the part to 5 V and the multiplied signal should be on the W output.
If you give me some more info on how you'd like to use the part (.i.e. SE or diff, frequency, etc.) I can get up and running quickly. I would recommend reading page 10 of the datasheet.
Hope this helps,
Thanks for your interest in using the ADL5391-EVALZ. Let me contact the application engineer of this product and get back to you if the user guide is available. In the meantime, if it will be of any help, the schematics of the board are available on the datasheet of the ADL5391.
Retrieving data ...