The error in the picture below, how could be this problem happen?
Thanks your helps!
That particular error is generated when the value read back from the flash does not match the expected value (based on the LDR file being written). It suggests that there is either a problem with the flash programmer driver, or a problem with the hardware.
Are you using a custom board? If so, what flash part are you using, and have you written a custom flash programmer driver? I ask as the flash programmer driver provided with VisualDSP++ for the 21369 EZ-KIT Lite is specific to the flash part used on our EZ-KIT Lite: if you use a custom board with a different flash part, you would need to modify the driver.
Retrieving data ...