Can we disable the HDCP and use ADV7513 . from the register setting find that it is possible .
Do you have plans to roll out a Non HDCP version of ADV7513
With best regards and wishes
The ADV7513 is a transmitter with HDCP. You do not require HDCP license to purchase HDCP transmitters. There is no Non-HDCP part planned.
Check out 0xAF bit to control encryption.
Can I ask you one more question about the ADV7513 and HDCP? According to my experience, the 0xAF is
written automatically by internal microcontroller, isn't it? Can we set it to a manual control? What I'm trying to
ask is that, for example, if I want to set the output of the chip without HDCP, I just need to set 0xAF= 0. It
won't be changeed internally. However, what I saw is that it would be internally changed sometimes. Why?
The 'fixed' 0xAF bits, 6,5,3,2,0 might change, however bits 7,4,1 are only set by the user and should not be changed by the HDCP controller
Thanks for your answer. However, the case I met may not as you said. 0xAF bits 7,4 will be changed by the controller
on my board. For the bit 1, it may not. I didn't see. But, each time, I set the bit 1, it would response late. I normally
have to set several times. Is it correct? I doubt something wrong on my board. If you are right, I think we need to
check the board. Many thanks.
Retrieving data ...