Please go easy on me as I am a beginner
Here goes, another impulse Ebay buy finally arrived.
Really I want to use it to output waves that I can watch on my oscilliscope.
Now I can't figure out how to use it without the little control app. The "AD9854 Control_Softwear" I am using now (AD9854_Software.exe from the souce code\For_VB directory that I got from the ebay seller) allows me to set the following:
Ramp Rate Clock
Output Amplitude checkbox with I and Q sliders
Multiplication Frequency dropdown with X0-X10 options
Work Mode dropdown with Single Tone, FSK, Ramped FSK, Chirp and BPSK
I have a bunch of questions, please help:
Does anyone have the pinouts for JP2, basically it's 6 pins?
What does the VR1 pot set, do I need to touch it?
Why does it have 6 SMA ports, I have tried E1 and E2 and both have a default freq of 1.000mhz and a prd of 1.000us what do e3 thru e6 do?
The fourth image here: http://item.taobao.com/item.htm?id=9044735744 shows an updated software with the following settings that I don't have, I think this guy Zhang Lihua 88 might be the designer of the board:
Looks like Wave Set, this could be a crucial one as I would like to get a square wave!
Anybody got this updated software or are familiar enough with these boards to help me out?
Thanks for looking.